Select Language:
< Back ANDOFITI (Vitex micrantha) Print Friendly View
Andofiti
Vitex micrantha Gurke
VERBENACEAE
Andofiti (Côte d`Ivoire); Andofiti
Vitex longeacuminata A. Chev.
The tree reaches a height of 15 to 20 m. The bole is slightly fluted and unbuttressed. The trunk diameter attains 30 to 70 cm.
Vitex micrantha is found in dense evergreen forests in high rainfall areas.
Wood diffuse porous. Occasionally wood semi-ring porous and/or ring porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 200 micras or more (large). Tyloses thin walled. Non-vestured pits. Vessels per mm2 6 to 10 (m Paratracheal axial parenchyma scanty and/or vasicentric. Non-crystals in axial parenchyma cells. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays non-storied. Rays 1 to 4 seriate. Prismatic crystals in the ray cells. Heterogeneous rays and/or multiseriate heterogeneous rays. Septate fibers present. Fibers with simple to minutely bordered pits.
Unrestricted
The heartwood is white or yellow-brown, darkening on exposure, it is not clearly demarcated.
Straight; grain has no particular influence on drying, machining and finishing qualities.
This wood has a somewhat medium texture.
Luster is reported to be low.
Not durable; important risks of decay attacks at any processing step, from logs up to final products. It must receive preservative treatment. Moderately resistant to termites attack. The heartwood is sensible to Lyctus attacks.
5
Difficult to treat with only a low penetration of the preservative products.
0.49
0.53
Ease of Drying: Drying is fairly easy; some difficulties could occur when drying too fast.
FR-5
872
88039
488
60
344
448
It is easy to saw.
Suitable for slicing.
Suitable for slicing.
Slight blunting effect; ordinary tools can be used for sawing and machining.
Machining of this species is reportedly easy.
Easy; no particular problems.
Easy; no particular problems.
Easy; no particular problems.
Easy; no particular problems.
No particular problem.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Can be polished without surface preparation.
No particular problems.
HOUSING GENERAL, flooring, fittings, FURNITURE AND CABINETS, cabinets, PLYWOOD AND VENEER, cores, PACKING, NAVAL CONSTRUCTION, boats, OTHER AND MUSICAL INSTRUMENTS, handicrafts, particleboard, paper
Please Provide Information To View Producer Information