Select Language:  

logo

< Back BUBINGA (Guibourtia tessmannii) Print Friendly View

< Back Print Friendly View

BUBINGA (Guibourtia tessmannii)

Trade Name

Bubinga

Scientific Name

Guibourtia tessmannii J.Leon.

Family

LEGUMINOSAE

Common Names

Essingang (Cameroon); Binbinga (Cameroon); Waku; Ovang; Mutenye; Mouega; Moubaka; Lianu; Essingang; Buvenga; Akume (United States of America); Waka (Zaire); Kevazingo (Gabon); Oveng (Equatorial Guinea); Bubinga

Scientific Name Synonyms

Copaifera tessmannii Harms

Description Of The Tree

Botanical Description

The tree reaches a height of 50 m. The bole is straight, cylindrical, up to 20 m in length. The trunk diameter attains 100 to 130 cm over the buttresses.

Natural Habitat

Guibourtia tessmannii is found in dense virgin forests and also near rivers or lake shores.

Natural Distribution

Equatorial West Africa.

View More Information

Wood Identification

Anatomic Description Of Wood

Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 100 to 150 micras (small). Vestured pits. Vessels per mm2 10 to 20 (abundant). Simple perforation plates. Vessel-ray pits similar to intervessel pits Axial parenchyma in marginal or in seemingly marginal bands. Paratracheal axial parenchyma scanty and/or vasicentric. Axial parenchyma lozenge-aliform. Axial parenchyma aliform. Prismatic crystals in chambered axial parenchyma cells and/or in fibers. 5 to 8 ce 4 to 10 rays per mm (medium). Rays non-storied. Larger rays more than 4 seriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Non-septate fibers. Fibers with simple to minutely bordered pits.

  • Wood Macro Photo Tangential Plane
  • Wood Micro Photo Of Transversal Section

Availability

Cites Status

Unrestricted

General Wood Description

Color

The sapwood is whitish, it has a thickness of 2 to 8 cm. The heartwood is red-brown or pinkish brown with purple veins, it is clearly demarcated. The silver figure is fine.

COLOR INDEX (1=Black, 7=Light yellow,white)

4

Grain

Straight or slightly interlocked, sometimes with an influence on further processing operations.

Texture

Texture is reported to be fine to medium.

Luster

The wood surface is described as low in luster.

Natural Durability

Durable to decay; this species can be utilized without preservative treatment for exterior joinery or similar uses. Resistant to termites attack. Heartwood is resistant to Lyctus attacks.

Natural durability index (1= Very high durability, 7=Vey low durability)

1

Internal Growth Stresses

For this species no growth stresses are reported.

Silica Content

Silica Content: Silica content is negligible. Amounts over 0.05% may affect wood processing. Silica Value: 0.01

Resistance To Impregnation

Nearly impossible to treat with a too much low penetration of the preservative substances.

Wood Physical Properties

Basic Density or Specific Gravity (O.D. weight/vol. green) (g/cm³)

0.78

Air-dry Density (Weight and volume at 12%MC) (g/cm³)

0.89

Total shrinkage Tangential (Saturated to 0%MC) (%)

7.7

Total shrinkage Radial (Saturated to 0%MC) (%)

6.3

Drying Defects

Ease of Drying: Drying is moderately easy; some particular care is needed. Drying Defects: Risks of distortions. Kiln Schedules: The kiln schedule has been tested.

Recommended Dry Kiln Schedule

FR-9

Dimensional stability ratio (Total Tangential Shrinkage %/Total Radial Shrinkage %)

1.2

Wood Chemical Properties

Wood Mechanical Properties

Bending Strength (MOR),12%MC (kgf/cm²)

1211

Stiffness (MOE) 12%MC (kgf/cm²)

191581

Compression parallel to fiber 12%MC (kgf/cm²)

711

Compression perpendicular to fiber 12%MC (kgf/cm²)

99

Shear strength radial 12%MC (kgf/cm²)

97

Janka hardness (side) 12%MC (kgf)

982

Janka hardness (end grain) 12%MC (kgf)

1031

Workability

Sawing

Sawing of this species requires powerful equipment.

Rotary Veneer Cutting

Suitable for slicing.

Sliced Veneer

Suitable for slicing.

Blunting Effect

Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.

Machining

It needs powerful tools for processing. Possible difficulties caused by interlocked grain are reported.

Planing

Moderately easy; tools must be cautiously sharpened.

Moulding

Easy; no particular problems.

Turning

30

Boring

Easy; no particular problems.

Mortising

Easy; no particular problems.

Nailing

Pre-boring is necessary.

Gluing

Difficult to glue because of the extracts content.

Sanding

Easy to perform; it gives good results.

Polishing

Can be polished without surface preparation.

Response To Hand Tools

Working with hand tools is difficult.

REFERENCED USES

End Uses Summary

HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, CONTAINERS, truck bodies, truck flooring, OTHER AND MUSICAL INSTRUMENTS, handicrafts

General Housing
  • 10 - Silica in Timbers
Beams
  • 11 - Prospect: The wood database
Joists
  • 12 - Tropical timbers of the world. Part I-Tropical American Species
Boards
  • 13 - Dry kiln schedules for commercial woods. Temperate and tropical. Section III. Latin American (Mexico, Central, and South America) Woods–Conventional Temperatures
Flooring
  • 14 - Handbook of Hardwoods
Parquet
  • 15 - Empire Timbers
Frames
  • 16 - Woods of the World
Steps
  • 17 - Tree Conservation Database
Paneling
  • 18 - W3TROPICOS Missouri Botanical Garden
Fittings
  • 19 - Silica in Timbers
Furniture Cabinets
  • 21 - Tropical timbers of the world. Part III-Southeast Asian and Oceanian Species.
Furniture, Luxury
  • 22 - Dry kiln schedules for commercial woods. Temperate and tropical. Section IV-Asian and Oceanian Woods
Cabinet
  • 24 - Empire Timbers
Panels, Veneers
  • 25 - Directory of Timber Trade Malaysia
Decorative veneer
  • 28 - Ministry of Agriculture, Fisheries & Forest of Fiji
Turning
  • 30 - Embassy of Honduras in Japan
Ornaments
  • 31 - Embassy of Colombia in Japan
Turned Articles
  • 32 - Embassy of Cote d`Ivoire in Japan
Knife Handles
  • 33 - Embassy of Gabon in Japan
Lasts
  • 34 - Embassy of Indonesia in Japan
Truck Body
  • 53 - Timbers of the New World
Truck Flooring
  • 54 - Bulletin of the Government Forest Experiment Station N.157: Identification of Tropical Woods
Handcraft
  • 66 - Maderas latinoamericanas. VII. Caracteristicas anatomicas. propiedades fisicomecanicas, de secado, y tratabilidad de la madera juvenil de Cordia alliodora (Ruiz & Pav. Oken.)

Please Provide Information To View Producer Information

* Or, continue as guest