Select Language:
< Back CORDIA D`AFRIQUE (Cordia platythyrsa) Print Friendly View
Cordia d`Afrique
Cordia platythyrsa Bak.
BORAGINACEAE
Omo (Nigeria); Ebe (Gabon); African cordia (Germany); African cordia (United Kingdom); Ebais (Gabon); Ebais (Cameroon); Ebe (Cameroon); Mukumari (Kenya); Mugoma (Kenya); Mukebu (Uganda); Sumba (Zaire); Bon (Côte d`Ivoire); Cordia d`Afrique
Cordia irvingii Baker pro parte; Cordia candidissima A. Chev.
The tree reaches a height of 20 to 32 m. The bole is cylindrical but rarely straight, 10 to 13 m in length. The trunk attains about 100 cm in diameter above the buttresses.
Cordia platythyrsa is a timber species occurring in closed forest and old secondary formations. It regenerates well in disturbed forest.
Widely distributed in tropical Africa, from Sierra Leone to Gabon and Central Africa.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Vessel clusters common. Tangential diameter of vessel lumina 200 micras or more (large). Tyloses thin walled. Non-vestured pits. Vessels per mm2 6 to 10 (medium). Simple perforation plate Paratracheal axial parenchyma scanty and/or vasicentric. Axial parenchyma aliform. Axial parenchyma in thick bands. Occasionally axial parenchyma storied. Crystal sand in axial parenchyma cells. Two cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays non-storied. Larger rays more than 4 seriate. Prismatic crystals in the ray cells. Heterogeneous rays and/or multiseriate heterogeneous rays. Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The heartwood is from pale golden brown to brown, occasionally pinkish brown, it is sometimes not clearly demarcated. The silver figure is medium.
4
Straight or slightly interlocked, sometimes with an influence on further processing operations.
This wood has a somewhat coarse texture.
The surface of the wood is naturally moderate in luster.
Durable to decay; this species can be utilized without preservative treatment for exterior joinery or similar uses. Resistant to termites attack. Heartwood is resistant to Lyctus attacks.
1
Residual stresses are reported to be absent.
Difficult to treat with only a low penetration of the preservative products.
0.39
0.41
Kiln Schedules: Based on its low density and air drying properties, terentang timber can be kiln dried using red meranti (F) or jeludong (H) kiln drying schedules.
FR-5
740
387
44
204
295
It is easy to saw.
Suitable for slicing.
Suitable for slicing.
Slight blunting effect; ordinary tools can be used for sawing and machining.
Machining of this species is reportedly easy.
Easy; no particular problems.
Easy; no particular problems.
30
Easy; no particular problems.
Easy; no particular problems.
No particular problem.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Needs pre-coating.
No particular problems.
HOUSING GENERAL, boards, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, Decorative veneer, TURNING, ornaments, turned furniture
Please Provide Information To View Producer Information