Select Language:  

logo

< Back KANDA BRUN (Beilschmiedia letouzei) Print Friendly View

< Back Print Friendly View

KANDA BRUN (Beilschmiedia letouzei)

Trade Name

Kanda brun

Scientific Name

Beilschmiedia letouzei Robyns et Wilczek

Family

LAURACEAE

Common Names

Bitehi (Côte d`Ivoire); Bonzale (Zaire); Nkonengu (Gabon); Kanda (Cameroon); Mfimbo (Tanzania); Kanda brun

Description Of The Tree

Botanical Description

The tree reaches a height of 20 m, with trunk diameters up to 60 cm.

Natural Habitat

Beilschmiedia letouzei occurs in semi-deciduous and Atlantic forests.

Natural Distribution

Central Africa, Cameroon and Central African Republic.

View More Information

Wood Identification

Anatomic Description Of Wood

Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 150 to 200 micras (medium). Tyloses thin walled. Non-vestured pits. Vessels per mm2 6 to 10 (medium). Simple perforation plates. Vessel-ray pits coars Axial parenchyma in marginal or in seemingly marginal bands. Paratracheal axial parenchyma scanty and/or vasicentric. Axial parenchyma lozenge-aliform. Non-crystals in axial parenchyma cells. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays non-storied. Rays 1 to 4 seriate. Silica bodies in the ray cells. Body ray cells procumbent with mostly 2 to 4 rows of upright and/or square marginal cells (Kribs-II). Septate fibers present. Fibers with simple to minutely bordered pits.

  • Wood Macro Photo Radial Plane
  • Wood Micro Photo Of Transversal Section

Availability

Cites Status

Unrestricted

General Wood Description

Odor

Light and pleasant odor.

Color

The heartwood is pink brown to greenish brown, it is not clearly demarcated. The silver figure is fine (not always visible).

COLOR INDEX (1=Black, 7=Light yellow,white)

4

Grain

Straight; grain has no particular influence on drying, machining and finishing qualities.

Texture

Texture is reported to be fine to medium.

Luster

Timber of this species is low in luster.

Natural Durability

Very durable to decay; without preservative treatment. This species is especially suited for all the uses with risks of permanent or long-lasting humidification. Resistant to termites attack. Heartwood is resistant to Lyctus attacks.

Natural durability index (1= Very high durability, 7=Vey low durability)

1

Internal Growth Stresses

For this species no growth stresses are reported.

Resistance To Impregnation

Difficult to treat with only a low penetration of the preservative products.

Wood Physical Properties

Basic Density or Specific Gravity (O.D. weight/vol. green) (g/cm³)

0.59

Air-dry Density (Weight and volume at 12%MC) (g/cm³)

0.65

Drying Defects

Ease of Drying: The wood usually dries without much degrade. Boards 75 mm thick take about 6 months to air dry from green to 20% moisture content. Drying Defects: Slight collapse and twisting may occur.

Recommended Dry Kiln Schedule

FR-8

Wood Chemical Properties

Wood Mechanical Properties

Bending Strength (MOR),12%MC (kgf/cm²)

1256

Compression parallel to fiber 12%MC (kgf/cm²)

735

Compression perpendicular to fiber 12%MC (kgf/cm²)

104

Janka hardness (side) 12%MC (kgf)

523

Janka hardness (end grain) 12%MC (kgf)

624

Workability

Sawing

It is easy to saw.

Rotary Veneer Cutting

Suitable for slicing, also suitable for peeling if treated.

Sliced Veneer

Suitable for slicing, also suitable for peeling if treated.

Blunting Effect

Severe blunting effect; stellited blades for sawing and carbide tools for machining are recommended.

Machining

Possible difficulties caused by interlocked grain are reported.

Planing

Moderately easy; tools must be cautiously sharpened.

Moulding

Easy; no particular problems.

Turning

30

Boring

Easy; no particular problems.

Mortising

Easy; no particular problems.

Nailing

Pre-boring is necessary.

Gluing

Glues well if basic gluing technical rules are followed.

Sanding

Easy to perform; it gives good results.

Polishing

Can be polished without surface preparation.

Steam Bending

This species can be used for steam bending.

Response To Hand Tools

No particular problems.

REFERENCED USES

End Uses Summary

HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, CONTAINERS, truck bodies, truck flooring, NAVAL CONSTRUCTION, boat deck, port storage, OTHER AND MUSICAL INSTRUMENTS, handicrafts, door core, coffin

General Housing
  • 10 - Silica in Timbers
Beams
  • 11 - Prospect: The wood database
Joists
  • 12 - Tropical timbers of the world. Part I-Tropical American Species
Boards
  • 13 - Dry kiln schedules for commercial woods. Temperate and tropical. Section III. Latin American (Mexico, Central, and South America) Woods–Conventional Temperatures
Flooring
  • 14 - Handbook of Hardwoods
Parquet
  • 15 - Empire Timbers
Frames
  • 16 - Woods of the World
Steps
  • 17 - Tree Conservation Database
Paneling
  • 18 - W3TROPICOS Missouri Botanical Garden
Fittings
  • 19 - Silica in Timbers
Furniture Cabinets
  • 21 - Tropical timbers of the world. Part III-Southeast Asian and Oceanian Species.
Furniture, Luxury
  • 22 - Dry kiln schedules for commercial woods. Temperate and tropical. Section IV-Asian and Oceanian Woods
Cabinet
  • 24 - Empire Timbers
Panels, Veneers
  • 25 - Directory of Timber Trade Malaysia
Faces
  • 26 - Annual Review and Assessment of the World Timber Situation 1998-ITTO
Decorative veneer
  • 28 - Ministry of Agriculture, Fisheries & Forest of Fiji
Turning
  • 30 - Embassy of Honduras in Japan
Ornaments
  • 31 - Embassy of Colombia in Japan
Turned Articles
  • 32 - Embassy of Cote d`Ivoire in Japan
Knife Handles
  • 33 - Embassy of Gabon in Japan
Lasts
  • 34 - Embassy of Indonesia in Japan
Truck Body
  • 53 - Timbers of the New World
Truck Flooring
  • 54 - Bulletin of the Government Forest Experiment Station N.157: Identification of Tropical Woods
Shipbuilding
  • 55 - Tropical Timber Atlas of Latin America
Boat Decking
  • 59 - Programa Nacional de uso Sostenible de los Bosques e Incremento a las Exportaciones.
Port Storage
  • 62 - Estudio Tecnológico de Maderas del Perú (Zona Pucallpa) Vol I
Handcraft
  • 66 - Maderas latinoamericanas. VII. Caracteristicas anatomicas. propiedades fisicomecanicas, de secado, y tratabilidad de la madera juvenil de Cordia alliodora (Ruiz & Pav. Oken.)
Door Cores
  • 76 - Descripción General y Anatómica de 105 Maderas del Grupo Andino.
Coffin
  • 78 - Amazonian Timbers for the International Market

Please Provide Information To View Producer Information

* Or, continue as guest